Lawn and Garden Equipment::
Auger 1Man Towable Hydraulic Hole Digger

• Available bit sizes: 6", 8", 10", 12", and 16"
• MODEL 660
• POWER SOURCE
• 13 hp (9.6 kW) category @ 3600 RPM, 4-cycle gasoline engines equipped with Lo Tone muffler and spark arrestor
• FUEL SPECIFICATION Gasoline, regular or unleaded
• STARTING METHOD Mechanical rewind
• AIR CLEANER Dual element type
• FRAME
• STRUCTURE Unitized welded steel plate and rectangular tube
• RESERVOIR LOCATION Center mounted over axle
• AUGER STORAGE SNAP-LOKTM auger storage system locks auger in the travel position when maneuvering on the jobsite
• SIDE TILT ADJUSTMENT 20" from vertical, infinite position, with locking mechanism
• TOWBAR Quick-attach type, complete with SAE Class II coupler, adjustable from 17/8" (48 mm) to 2" (51 mm) ball size and safety chains.
• Included as a standard accessory
• TOW CONFIGURATION From operator position end
• HYDRAULIC SYSTEM
• CONFIGURATION Open center type
• HYDRAULIC PUMP Fixed displacement, gear type, with third line return to reservoir
• SYSTEM FLOW/ 8 GPM (30 lit/min) @ 2000 PSI (140 kg/cm2), Hydraulic Tool Manufacturers Association (HTMA) Class II
• PRESSURE PARAMETERS
• HYDRAULIC MOTOR Low speed, high torque (LSHT), geroler type direct coupled to the auger
• MAXIMUM DRILLING TORQUE 276 ft. lbs. (374 N.m.) @ 2000 PSI (140 kg/cm2)
• AUGER ROTATION SPEED 144 RPM, no load
• AUGER FORWARD/ Four way, directional control valve, lever actuated, spring loaded to return to the neutral position when released
• REVERSE CONTROL
• FILTRATION Integral suction screen to pump, return line diffuser into reservoir and externally mounted, 10 micron return line filter
• POW-R-PORTTM Built-in power source for operating HTMA Class II hydraulic tools. Contact the factory for specific information
• TOOL CIRCUIT
• RESERVOIR CAPACITY 5 US gallons (19 lit)
• AUGER
• DESIGN Auger construction features Pengo type, cast-steel boring heads, forged-steel teeth and cast-steel screw bits for maximum performance and
• versatility in a wide cross section of soil compositions. Thick, cross-sectioned helicoid or sectional-type auger flighting deliver strength and
• wear resistance. Flighting pitch is set to produce cleaner, more usable holes in sandy or granular type soils. All boring head wear parts are
• field replaceable.
• DIAMETERS 2" (51 mm) to 18" (457 mm)
• LEAD AUGER AND A full line of lead augers and continuous-flighted auger extensions designed to extend the digging depth is available in standard 36" (914 mm)
• AUGER EXTENSION LENGTH effective lengths. A non-flighted auger extension is available in a standard 15" (381 mm) effective length.
• GENERAL
• AUGER DRIVESHAFT Choice of three options: 13/8" (35 mm) hexagon (General), 7/8" (22 mm) square (Ground Hog), or Stihl type.
• CONFIGURATION Required configuration to be specified.
• TIRES 4.80-12 highway use rated
• LENGTH 113" (2870 mm)
• WIDTH 41" (1041 mm)
• OPERATION WEIGHT
• (LESS TOWBAR) 440 lbs (200 kg)